ASA Basic
Specification
Drying Conditions before Printing:
80°C, 12 hours (using a convection oven)
Nozzle Diameter:
φ0.4/0.6mm (recommended φ0.4mm)
Layer Thickness:
0.12~0.3mm
Nozzle Temperature:
240~270°C
Build Plate Temperature:
100~120°C
Printing Speed:
40~300mm/s
Cooling Fan:
0~50%
Retraction Length:
1~3mm
Retraction Speed:
30~50mm/s
Support Materials:
Self-supporting, HIPS
Filament Diameter:
1.75mm
Printing and Storage Environment Humidity:
Room temperature to 40°C, ≤20% RH (sealed with desiccant)
Not picky, broadly compatible.
FFF devices on the market with a filament diameter of 1.75mm can all be used, but high-speed FFF 3D printers perform better.