Accessories list

In the box of Guider 3 Ultra series, we have configured some small accessories for the convenience of users. Here is a brief description of these accessories:


No.	Actual Photo	Description	Application	Note
1		PLA Filament	Material for printing models
2		Flexible Steel Sheet	When printing ABS filament, this helps with the first layer adhesion, reduces warping, and improves the print success rate.
3		Diagonal Pliers	Tool for cutting filament during filament change
4		Grease (lubricant)	Used for maintenance of lead screws and guide rails, reducing friction
5		Glue	Applied to the build surface to enhance adhesion
6		Nozzle Kit	Spare 0.4mm nozzle kit, for replacing the original nozzle kit when it is damaged
7		USB Flash Drive	For model storage and firmware upgrades
8		Unclogging Pin Tool	Tool for cleaning out the nozzle in case of clogs
9		Allen Wrench Set	Used for maintenance and disassembly of the extruder, etc.
10		Tweezers	For cleaning supports in tight spaces
11		Scraper	For removing filament residues and models from the build plate
12		Straight Screwdriver	For disconnecting the heated bed heating cable from the motherboard	Note: For your safety, please power off before doing so and contact a professional if necessary.
13		Needle-nose Pliers	For cleaning supports or repairing equipment
14		Heat Resistant Gloves	Wear when replacing or repairing the nozzle assembly to prevent burns
15		Fuse	Backup fuse for the 3-in-1 switch, for replacing a damaged one
16		Brush	For cleaning waste from the extruder gears or dust from the machine