HS PLA Rainbow
HS PLA is not ordinary PLA
Specification
Drying Conditions before Printing:
50°C, 5 hours (using a convection oven)
Nozzle Diameter:
φ0.4/0.6mm(φ0.4mm recommended)
Layer Height:
0.12~0.3mm
Nozzle Temperature:
190~240°C
Build Plate Temperature:
25~60°C
Printing Speed:
40~350mm/s (higher speeds require higher temperatures)
Cooling Fan:
50~100%
Retraction Length:
1~2mm
Retraction Speed:
30~50mm/s
Support Materials:
Self-supporting, PVA, BVOH
Filament Diameter:
1.75mm
Printing and Storage Environment Humidity:
Room temperature to 40°C, ≤20% RH (sealed with desiccant)
Not picky, broadly compatible.
FFF devices on the market with a filament diameter of 1.75mm can all be used, but high-speed FFF 3D printers perform better.
