PETG ESD
Specification
Pre-printing Drying Conditions:
70°C, 5h (convection oven)
Nozzle Diameter:
φ0.4/0.6mm (recommended φ0.4mm)
Layer Thickness:
0.1 mm~0.3 mm
Nozzle Temperature:
220~270°C
Build Plate Temperature:
70~80°C
Printing Speed:
40~220mm/s (higher speeds require higher temperatures)
Cooling Fan:
0~50%
Retraction Length:
1~2mm
Retraction Speed:
30~50mm/s
Support Materials:
Self-supporting
Filament Diameter:
1.75 mm
Printing and Storage Environment Humidity:
Room temperature to 40°C, ≤20% RH (sealed with desiccant)
Not picky, broadly compatible.
FFF devices on the market with a filament diameter of 1.75mm can all be used, but high-speed FFF 3D printers perform better.
