HS PETG Transparent
HS PETG is not ordinary PETG
Specification
Drying Conditions before Printing:
70°C, 5 hours (Convection Oven)
Nozzle Diameter:
φ0.4/0.6mm (Recommended φ0.4mm)
Layer Height:
0.12~0.3mm
Nozzle Temperature:
220-270°C
Build Plate Temperature:
Room temperature to 60°C
Printing Speed:
100-350mm/s
Cooling Fan:
50-100%
Retraction Length:
1~2mm
Retraction Speed:
30~50mm/s
Support Materials:
Self-supporting, PVA, BVOH
Filament Diameter:
1.75/2.85 mm
Printing and Storage Environment Humidity:
Room temperature to 40°C, ≤20% RH (Sealed with desiccant)
Not picky, broadly compatible.
FFF devices on the market with a filament diameter of 1.75mm can all be used, but high-speed FFF 3D printers perform better.